Speed Turtle 2.0 Easy Flash Module

Speed Turtle 2.0 Easy Flash Module
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

5.0 average, based on 4 reviews

$194.98 $149.99


Product Information
Specification

Stock varies on the 2.0's Please allow 2-3 business days handling time. Thanks!

Please specify if you want on/off switch or voltage switch.

The SpeedTurtle 2.0 Easy Flash Module is a small, easy to use vehicle exterior light flasher. It is a simple and effective way to flash the factory exterior lights of supported vehicles. The system is easily installed in minutes and is a true plug and play solution for most vehicles. If equipped, the module will flash the following lights: front low beams, front high beams, front fog lights, front and rear turn indicator lamps, side view mirror turn signal marker lamps.

Unlike other solutions, the SpeedTurtle Module does not require any cutting or reconfiguration of the vehicle's wiring harness. This allows the module to easily be removed and installed in another vehicle without repairing or replacing vehicle components.

 

FEATURES:

  • 6" micro USB cable and zip ties included
  • 10 unique flash patterns
  • Park mode allows you to change patterns or disable specific lights when in park.
  • Two switch inputs as well as the ability to activate the module using pre-existing vehicle buttons or controllers
  • Switch interface:
    • Toggle Switch Harness: This harness provides a simple ON/OFF toggle switch with adhesive backing. There are two internal LEDs to the toggle switch with green indicating the switch is OFF and orange indicating the switch is ON. While this is the simplest of the two harnesses to install, it only provides one of the two possible switch inputs. The toggle switch harness is connected to Input 1 on the module.
    • Voltage Input Harness: This harness provides two ‘flying lead’ input wires. Each wire will accept a 5 – 17 volt input signal from a switch or light controller of your choice. The white wire corresponds to Input 1 and the green wire corresponds to Input 2.
  • If your vehicle is equipped with these lights they will flash. You can program which do and do not flash:
    • Front Low Beams
    • Front High Beams
    • Front Turn Signals
    • Front Fog Lamps
    • Front LED Accents
    • Rear Turn Signals
    • Rear Stop Lamps
    • Third / Center Mounted Brake Lamp
    • Reverse Lamps
    • Rear LED Accents
    • Pickup Bed Lamp

Unlike other solutions, the SpeedTurtle Module does not require any cutting or reconfiguration of the vehicle’s wiring harness. This allows the module to be easily installed by anyone in minutes. The plug and play installation also allows the module to be removed and installed in another vehicle without repairing or replacing vehicle components.

The module has two switch inputs as well as an existing vehicle button (most vehicles) that can be configured to activate the module either through a long press or quick cycle.

*Park only vehicles will only flash while the vehicle is in Park. This currently includes the Ford F150 and Ford Explorer.  This expected to change in the future with a simple downloadable software update.

Product Code STEFM
Condition New
Weight 0.750Lb


Customer Reviews

Average Rating: 5

New vehicles

1 2 3 4 5
Looking for one for a 2017 ford focus (04 Feb 2018, 20:59)

Speed Turtle

1 2 3 4 5
I installed this on my '09 Silverado and works great. Everyone on my department wants one. Thanks for the quick shipping also. (27 Dec 2017, 08:59)

2017 Toyota Tacoma

1 2 3 4 5
Would you please get this for the 2017 Toyota Tacoma would love to put it on (22 Nov 2017, 19:18)

Other Vehichle

1 2 3 4 5
Please get these for 2017 toyota tacoma (09 Nov 2017, 15:19)
Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.
Top